Left Side Cover Removal
7-8 Removal/Replacement Procedures June 1999
Left Side Cover Removal
To remove the left side cover:
1 Open the top, back, and front covers.
2 Duplex only: Remove the duplex tray by disconnecting P305 and loosening the two
thumb screws.
3 Remove the upper and lower paper cassettes.
4 Loosen the two screws for the left side cover.
5 Lift the cover up and away from the printer.
Replacement Note:
When reinstalling, make sure the inside mounting tabs are properly positioned.
Loosen Screws
To Next Page
Loading...