Jogging Motor Control Board Removal
June 1999 Removal/Replacement Procedures 7-39
Jogging Motor Control Board Removal
To remove the jogging motor control board:
1 Open the back cover.
2 Remove the paper feed drive cover (three screws).
3 Remove the power control board cover (one screw).
4 Disconnect CN100, CN101, and CN102.
5 Disengage the board. To do this, pinch the two standoffs on the board.
6 Lift the board from its mounting bracket.
Power Control
Board Cover
Paper Feed Drive Cover
Standoffs
CN101
CN100
CN102
Mounting Bracket
Jogging Motor Power Control Board Detail
To Next Page
Loading...