Hard Disk
8-16 Options June 1999
Hard Disk
Instructions for installing and updating a hard disk are included with the packaged option.
Please refer to the original documentation.
Troubleshooting Hard Disk Problems
If you have difficulty installing your hard disk:
• Service Error 573 is most often caused by a loose cable. Recheck all cable connections
and retry the load process. Note that it may be necessary to remove the disk drive
assembly to recheck the cable connections at the hard disk.
• Make sure that the data cable from the hard disk is connected securely to both the back
of the drive and to the controller board.
• Make sure that the printer’s floppy drive is configured as the A: drive (i.e., make sure
that the jumper on the back of the drive is on DS0).
If your hard disk still does not function correctly, note any error codes displayed and
report them to your service representative.
To Next Page
Loading...