E10: Envelope Tray Out of Envelopes
3-14 Troubleshooting Analysis Guide (TAGs) June 1999
5
Reinsert the envelope cassette.
• Watch the pressure lever as the cassette is inserted.
Does the pressure lever elevate the envelopes to the correct feeding position?
No: Check the following for defects or incorrect mounting:
• Cassette tray
• Damper assembly
• Upper pressure lever
• Upper cassette release cam
• Upper cassette release latch
• Wire cable, pulley and spring
• Upper cassette release lever
Replace the defective part, then turn to TAG 002: Check & Problem Resolution.
Yes: Replace the PCL board, then turn to TAG 002: Check & Problem Resolution.
To Next Page