Windows 7
a. Click Start.
b. Click Devices and Printers.
c. Right-click the product driver icon, and then select Printer properties.
d. Click the Ports tab, and then click Configure Port.
e. Verify the IP address, and then click OK or Cancel.
f. If the IP addresses are not the same, delete the driver, and reinstall the driver using the
correct IP address.
g. Create a new HP TCP/IP port using the correct IP address.
4. Try using the IP address to open the HP Embedded Web Server in a supported Web browser.
124 Chapter 5 Solve problems ENWW
To Next Page
Loading...