Add memory: How do I?
Use this section to answer questions about adding memory.
Installing memory and font DIMMs
You can install more memory for the printer, and you can also install a font DIMM to print characters
for languages such as Chinese, or for the Cyrillic alphabet.
CAUTION Static electricity can damage DIMMs. When handling DIMMs, wear an antistatic
wrist strap, or frequently touch the surface of the DIMM antistatic package and then touch
bare metal on the printer.
1.
Print a Configuration page by pressing
(Select) and (Cancel Job) simultaneously. (A
Supplies Status page and possibly an HP Jetdirect Configuration page also print.) If the
Configuration page does not print in your language, see
Device pages and reports.
2. After the Configuration page prints, turn the printer off and disconnect the power cable.
3. On the left rear side of the printer, open the DIMM door.
102 Chapter 9 How do I? ENWW
Downloaded from ManualsPrinter.com Manuals
To Next Page
Loading...
