EasyManua.ls Logo

HP color laserJet 4550 series - Page 199

HP color laserJet 4550 series
382 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
C7085-90921 Chapter 6 Removal and replacement 197
Left side fan
To remove the left side fan
1 Remove the top cover.
2 Remove the left side cover.
3 Remove the rear door.
4 Disconnect the cable shown in callout 1, Figure 6-59.
5 Remove the three screws from the left rear fan shield shown in Figures 6-59 and 6-60
(callout 2) and remove the fan shield.
6 Disconnect the cable shown in callout 1, Figure 6-61.
7 Remove the screw from the black plastic cover and remove the fan casing shown in
callout 2, Figure 6-61.
8 Free the fan cable from the cable stay.
9 Press out on the three plastic tabs and slide the fan out.
Left side fan replacement tip
Verify the label is facing out when replacing the left-side fan.
Figure 6-59 Left side fan removal and replacement (1 of 3)
1
2
2

Related product manuals