HP color laserJet 4550 series - Page 283

C7085-90921 Chapter 7 Troubleshooting 281
Calibration Menu
This printer features automatic, internal calibration to produce optimum color for most print jobs. The
Calibration Menu provides fine-tuning for critical color-matching requirements.
For information about using this menu to set toner densities, see page 250.
CAUTION Calibrating toner densities changes the color balance of your printer by altering halftones. It affects all
print jobs. Notify your network administrator before performing this procedure.
Table 7-21 HP Color LaserJet 4500 Calibration Menu settings
Menu Item Values Description
PRINT
CALIBRATION PAGE
Prints out the color
calibration page.
CYAN
DENSITY
-5 to +5
(default: 0)
Used for increasing or
decreasing cyan toner
density.
MAGENTA
DENSITY
-5 to +5
(default: 0)
Used for increasing or
decreasing magenta toner
density.
YELLOW
DENSITY
-5 to +5
(default: 0)
Used for increasing or
decreasing yellow toner
density.
BLACK
DENSITY
-5 to +5
(default: 0)
Used for increasing or
decreasing black toner
density.
RESET DENSITY
VALUES
Resets density values back
to default settings. Press
[Select] to reset values.
Table 7-22 HP Color LaserJet 4550 Calibration Menu settings
Menu Item Values Description
PRINT
CALIBRATION PAGE
Prints out the color
calibration page.
CYAN
DENSITY
-5 to +5
(default: 0)
Used for increasing or
decreasing cyan toner
density.
MAGENTA
DENSITY
-5 to +5
(default: 0)
Used for increasing or
decreasing magenta toner
density.
YELLOW
DENSITY
-5 to +5
(default: 0)
Used for increasing or
decreasing yellow toner
density.
BLACK
DENSITY
-5 to +5
(default: 0)
Used for increasing or
decreasing black toner
density.
RESET DENSITY
VALUES
Resets density values back
to default settings. Press
[Select] to reset values.