HP color laserJet 4550 series - Page 289

C7085-90921 Chapter 7 Troubleshooting 287
Networking page set
This set of pages allows the network administrator to configure the HP JetDirect card for the printer.
Refer to the online Help and to the HP JetDirect Print Server Administrator’s Guide for more
information.
WWW To download the HP JetDirect Print Server Administrator’s Guide, go to http://www.hp.com/support/
lj4550. When you connect, select Manuals.
Printer configuration page
Printing a printer configuration page can help you verify that the printer is configured properly. This
can be useful in troubleshooting printer problems.
To print a printer configuration page
1 On the printer control panel, press [MENU] until INFORMATION MENU appears.
2 Press
[ITEM] until PRINT CONFIGURATION appears.
3 Press
[SELECT] to print the configuration page. The printer will return to the READY state.
Note If the printer is configured with EIO cards (for example, an HP JetDirect Print Server), an additional
configuration page will print that provides interface configuration information.
Interpreting the printer configuration page
The following sample illustrates a printer configuration page.
Figure 7-13 4500 series (left) and 4550 series (right) printer configuration page
1 Printer information—Lists the printer serial number, PCL/Emulated PostScript firmware
revision, total number of pages printed during the life of the printer, and total number of color
pages printed during the life of the printer.
2Event log—Lists the last five printer events, including printer jams, service errors, and other
printer conditions.
3 Installed personalities and options—Lists installed options such as EIO cards, DIMMs, duplex
printing accessory, and 500-sheet paper feeder.
4I/O menu—(Color LaserJet 4500 series only) Lists the current settings of the I/O menu items.
1
2
3
9
8
7
12
14