54 Installation and configuration C7085-90921
12 Lower the flap to partially cover the toner cartridge and close the
top cover.
Note
You must close the top cover before installing the next toner cartridge.
13 On the printer control panel, press
[VALUE +] once to prepare the
printer for installation of the next toner cartridge. When the printer
is ready, the control panel displays:
TONER POSITION
(color) = MISSING
14 Install the other three toner cartridges by repeating steps 3
through12. Install the cartridges in the following order:
1. black (K)
2. magenta (M)
3. cyan (C)
4. yellow (Y)
15 After installing the fourth toner cartridge, close the top cover and
press
[GO]. Wait while the printer runs an internal color calibration.
The calibration takes a few minutes. When the printer is ready, the
control panel displays:
READY.
CAUTION
If you need to ship the printer, remove the toner cartridges and
imaging drum before shipping.
12
13
14
15
To Next Page
Loading...