86 Printer maintenance C7085-90921
Replacing the toner cartridges
Replace the toner cartridge when the control panel displays:
TONER CMYK OUT.
The display can indicate that one or more toner colors are out.
1 With the printer turned on and warmed up, push the dark gray
release button on the side of the printer ([1]) and open the
printer’s top cover ([2]).
Note
If you need to replace a toner cartridge and the
TONER CMYK LOW or
TONER CMYK OUT messages are not displayed on the control panel,
open and close the top cover. Wait for the
PRESS SELECT TO CHANGE
TONER
message to appear on the control panel. Press [SELECT] and the
message
TONER=(COLOR) appears on the printer control panel. Press
[–VALUE+] to select the toner cartridge you want to replace, and
proceed to the following steps.
2 Lift the toner access cover and remove the used toner cartridge.
CAUTION
Do not shake the toner cartridges after removing them.
3 Position the toner cartridge over the cartridge slot so that the blue
arrow on the toner cartridge points to the blue arrow on the printer.
The arrow on the right (control panel side of the printer) should
point straight down.
1
2
3
To Next Page
Loading...