12 Press when finished entering the PIN.
13 Press
to delete the job.
Mopier mode
When Mopier mode is enabled, the printer produces multiple, collated copies from a single print job.
Multiple-original printing (mopying) increases printer performance and reduces network traffic by
sending the job to the printer once, then storing it in the printer’s RAM. The remainder of the copies
are printed at the printer’s fastest speed. Documents can be created, controlled, managed, and
finished from the desktop, which eliminates the extra step of using a photocopier.
The HP Color LaserJet 4700 series printers support mopying provided they have enough total
memory (160 MB DDR plus 32 MB on the formatter board). The mopying feature is enabled by
default if the Mopier Mode setting is Enabled in the Device Settings tab.
Storing a print job
You can download a print job to the printer without printing it. You can then print the job at any time
through the printer control panel. For example, you might want to download a personnel form,
calendar, time sheet, or accounting form that other users can access and print.
To store a print job permanently, select the Stored Job option in the driver when printing the job.
1 Press M
ENU
to enter MENUS.
2 RETRIEVE JOB is highlighted.
3 Press
to select RETRIEVE JOB.
4 Press
to highlight your USER NAME.
5 Press
to select your USER NAME.
6 Press
to highlight a JOB NAME.
7 Press
to select the JOB NAME.
PRINT is highlighted.
8 Press
to select PRINT.
9 Press
or to select the number of copies needed.
10 Press
to print the job.
Quick-copying a job
Quick Copy stores a copy of a printed job on the hard disk, and allows you to print additional copies
of a print job using the control panel. The number of quick-copy print jobs that can be stored in the
printer is set from the printer control panel.
138 Chapter 4 Printing tasks ENWW
To Next Page
Loading...