8 Reconnect the power cable, and turn the printer on.
9 Print a configuration page (see Configuration page). In addition to a printer configuration page
and a Supplies Status page, an HP Jetdirect configuration page that contains network
configuration and status information should also print.
If the printer does not print, uninstall and reinstall the print server card to ensure that it is
completely seated in the slot.
10 Perform one of these steps:
● Choose the correct port. See the computer or operating system documentation for
instructions.
● Run the printer installation software again, choosing the network installation this time.
280 Appendix A Working with memory and print server cards ENWW
To Next Page
Loading...