Rear-upper cover
1. Remove the following components:
●
Right cover. See
Right cover on page 103.
●
Left cover. See
Left cover on page 105.
●
Rear-side cover. See
Rear-side cover on page 115.
2. Open the rear door.
3. Use a small flatblade screwdriver to release two tabs (callout 1).
Figure 6-34 Remove the rear-upper cover (1 of 2)
1
4. Pull the rear-upper cover away from the product to remove it.
Figure 6-35 Remove the rear-upper cover (2 of 2)
116 Chapter 6 Removal and replacement ENWW
To Next Page
Loading...