Rear door and rear-lower cover
1. Remove the following components:
●
Right cover. See
Right cover on page 103.
●
Left cover. See
Left cover on page 105.
●
Rear-side cover. See
Rear-side cover on page 115.
2. Remove two screws (callout 1).
Figure 6-36 Remove the rear door and rear-lower cover (1 of 4)
1
3. Release one pin (callout 2), and then slide the rear door and rear-lower cover toward the side of
the product with the interface connectors.
Figure 6-37 Remove the rear door and rear-lower cover (2 of 4)
2
ENWW External panels, covers, and doors 117
To Next Page
Loading...