Copy Count setting
Copy Count specifies the number of copies to print. This driver setting is useful for software programs
that do not provide a copy count. If a copy count is available in the software program, set the copy count
in the software program.
The requested number of copies appears in the Copy Count option. Select the number by typing in the
box or by using the up and down arrows on the right side of the text box. For the HP Color LaserJet
CP1510 Series printer, valid entries are numbers from 1 to 9999. The copies value will not advance
from the maximum number (9999) to 1 when the up arrow is used, or change from 1 to the maximum
number (9999) when the down arrow is used.
When you click another group box or leave the Advanced tab, invalid entries into the edit box (such as
non-numerical input, numbers less than 1, or numbers greater than 9999) change to the last valid value
that appeared in the box. The default number of copies is 1.
Problems can develop when a software program and the driver it is running on both allow the user to
set the number of copies to print. In most cases, the software program and the driver communicate, so
that the number of copies set in one location (such as the program) appears in the other (such as the
driver). For some software programs, this communication does not take place, and the copies values
are treated independently. For example, setting 10 copies in the program and then setting 10 copies in
the driver might result in the printer making 100 copies (10 x 10). Set the number of copies in the software
program, whenever possible.
Graphic settings
The Graphic settings contain the following controls.
●
Image Color Management settings
●
TrueType Font settings
Image Color Management settings
Image Color Management (ICM) options are used for printing color graphics. The ICM options make it
possible for programs to adjust colors before printing so that the color of images on the screen more
closely matches the color of printed images. The following options are available:
●
ICM Method. The ICM Method setting specifies how to print color graphics. The default setting for
ICM Method is ICM Disabled. Additional options on the ICM Method drop-down menu include:
◦
ICM Handled by Host System. Click this option to perform calculations for color matching
on the host computer before sending the document to the printer.
◦
ICM Handled by Printer. Click this option to perform calculations for color matching on the
printer. A set of rules for mapping the colors is created and downloaded to the printer (which
must be PostScript language level 2 or higher). The printer uses these rules to adjust colors
in the document.
●
ICM Intent. The ICM Intent setting specifies how color images are created to produce the best-
looking image on the printed page.
◦
If printing a chart or using fully saturated, bright colors, click Graphics to achieve the best
quality.
◦
For photographs or pictures where the colors blend together, click Pictures to maximize the
contrast.
ENWW Advanced tab features 171
HP PCL 6, PS emulation
drivers, and UPD for
Windows
To Next Page
Loading...