◦
If the document uses a color that you need to match exactly, and you are sending the
document to a printer that has that specific color of ink, click Proof.
◦
To preview the color settings from another printer, click Match.
TrueType Font settings
This option specifies the TrueType Font settings. The following settings are available:
●
Substitute with Device Font. This setting causes the printer to use equivalent fonts for printing
documents that contain TrueType fonts. This permits faster printing; however, special characters
that the printer font does not support might be lost. This is the default setting.
●
Download as Softfont. This setting causes TrueType fonts to be downloaded and used for
printing, instead of the fonts installed through the printer.
Document Options
The Document Options settings contain the following controls:
●
Advanced Printing Features
●
PostScript Options (PS Emulation only)
●
Printer Features
●
Layout Options
Advanced Printing Features
When the Advanced Printing Features setting is Enabled, metafile spooling is turned on and the
Finishing tab options such as Page Order, Booklet Layout, and Pages per Sheet are available,
depending on the printer. For normal printing, leave the Advanced Printing Features setting at the
default (Enabled). If compatibility problems occur, disable the feature. However, some advanced
printing features might still be available in the print driver, even if they have been disabled. If you select
an advanced printing feature in the print driver that has been disabled on the Advanced tab, the feature
is automatically turned on again.
PostScript Options (PS Emulation only)
The following PostScript options appear in the PS Emulation:
●
PostScript Output Option
●
TrueType Font Download Option
172 Chapter 4 HP PCL 6, PS emulation drivers, and UPD for Windows ENWW
HP PCL 6, PS emulation
drivers, and UPD for
Windows
To Next Page
Loading...