Image-formation system
The image-formation system creates the printed image on the paper. The system consists of the
following components:
●
Print cartridges
●
ITB
●
Secondary transfer roller
●
Fuser
●
Laser /scanner units
The DC controller controls the laser scanner unit and each of the high-voltage power supplies to form
the toner image on the photosensitive drum surface, according to the VIDEO signals. The toner image
is then transferred to the print-media and fused.
Figure 1-10 Image-formation system
Print cartridge
Laser scanner unit
Fuser
ITB
Secondary
transfer roller
High-voltage power supply D
DC controller
High-voltage power supply T
Laser scanner unit
ENWW Image-formation system 21
To Next Page
Loading...