Step 7: Separation
The stiffness of the paper causes it to separate from the ITB as the ITB bends. The static-charge
eliminator removes excess charge from the paper to make sure that the toner fuses correctly.
Figure 1-19 Separation
ITB
Secondary transfer roller
Paper
Secondary transfer
opposed roller
Static charge
eliminator
Step 8: Fusing
To create the permanent image, the paper passes through heated, pressurized rollers to melt the toner
onto the page.
Figure 1-20 Fusing
Paper
Pressure roller
Fuser sleeve
Fuser heater
Toner
ENWW Image-formation system 27
To Next Page
Loading...