Clear jams in the stapler/stacker accessory or the stapler/stacker with hole punch
accessory
The procedures to clear paper jams and staple jams in the stapler/stacker accessory and the stapler/stacker
with hole punch accessory are similar. Use the following procedures to check for jams in all possible locations
inside the finishing accessory. When a jam occurs, the control panel displays an animation that assists in
clearing the jam. Only the stapler/stacker with hole punch accessory is shown in the following tasks. Steps
that apply only to the hole-punch model are clearly indicated.
●
Clear top left door jams in the stapler/stacker
●
Clear Stapler 1 jams in the stapler/stacker
●
Clear stapler/stacker connection jams (hole-punch models only)
Clear top left door jams in the stapler/stacker
1. Open the top left door.
2. Hole punch models only: Open the hole-punch
door.
ENWW Clear jams 131
To Next Page
Loading...