Stapling mailbox (M680)
The stapling mailbox installs on the delivery assembly and delivers paper to the output bin. The stapling
mailbox has two modes:
●
Stacker mode
●
Mailbox/job separator mode
Stapling is available for both modes.
Figure 1-62 Stapling mailbox
Output bin 1 delivery roller
Output bin 2 delivery roller
Output bin flapper
Stapler/Stacker feed roller 1
Inlet flapper
Alignment roller
Output bin 3 upper delivery roller
Stapler/Stacker feed roller 2
Stamp
Output bin 3 lower delivery roller
Figure 1-63 Signals for the stapling mailbox
Stapler/Stacker
controller
Motor
Solenoid
Photointerrupter
DC controller
Switch
+24V
Stapler/Stacker
Formatter
The stapling mailbox contains several motors, solenoids, sensors, and switches.
ENWW Stapling mailbox (M680) 85
To Next Page
Loading...