3. The printed page on the staple tray is aligned. For horizontal alignment, the jogger motor rotates and
moves the jogger guide. For vertical alignment, the paddle motor is reversed and the alignment roller
pushes the page.
Figure 1-66 Stapling mailbox stapler operation (2 of 4)
M4
M3
SR4
SR6
Alignment roller
Paddle motor
Alignment roller sensor
Jogger sensor
Jogger guide
Jogger motor
Staple tray
The controller determines a paddle motor failure and notifies the formatter through the DC controller
when it does not detect the alignment roller sensor for a specified period after the paddle motor starts
rotating.
4. After alignment, the stamp solenoid is driven and the stamp holds the page.
5. Steps 1 through 4 repeat for each page.
ENWW Stapling mailbox (M680) 91
To Next Page
Loading...