Mailbox/job separator mode
The mailbox/job separator mode delivers the printed page to the designated bin for each print job.
Figure 1-72 Stapling mailbox sensors for mailbox/jam separation
PS2502
PS2504
SR3
Output bin 1 media full sensor
Output bin 2
media full sensor
Output bin 3
media full sensor
The stapler/stacker controller determines if the stapling mailbox is full and notifies the formatter through
the DC controller when it encounters the following condition:
●
The designated output bin media full is detected.
●
The staple operation is designated when output bin 3 is full of paper.
ENWW Stapling mailbox (M680) 97
To Next Page
Loading...