Resend Upgrade
Description
A firmware upgrade did not complete successfully.
Recommended action
Upgrade the firmware again.
Restore Factory Settings
Description
The product is restoring factory settings.
Recommended action
No action necessary.
Restricted from printing in color
Description
The print job is being forced to print in black either because the product is set to print only in black or because
the user ID and application ID do not have color printing permissions.
Recommended action
To enable color printing for the product, change the Restrict Color setting in the Manage Supplies menu.
RFU Load Error Send full RFU on <X> Port
Description
The product displays this message before the firmware is loaded at initialization when an error has occurred
during a firmware upgrade.
Recommended action
Resend the firmware upgrade.
ROM disk device failed To clear touch “OK”
Description
The specified device failed.
Recommended action
Touch the OK button to clear the error.
ROM disk file operation failed To clear touch “OK”
Description
A PJL command was received that attempted to perform an invalid operation, such as downloading a file to a
nonexistent directory.
418 Chapter 2 Solve problems ENWW
To Next Page
Loading...