Table 2-64 Image defects table (continued)
Problem Sample Cause Solution
High-density toner on trailing
edge.
The trailing edges of images
have an increase in toner
density. This is most noticeable
in transitions from heavy toner
to white.
Additional toner develops to the
OPC in areas of transition from
heavy density to white.
Do the following:
1. From the Home screen on the
product control panel, scroll to
and touch the Administration
button.
Open the following menus:
●
General Settings
●
Print Quality
●
Adjust paper type
2. Select on of the following paper
types:
●
Heavy 111-130g
●
Extra Heavy 131-175g
●
Card Stock 176-220g
3. Resend the print job .
NOTE: This might reduce the
heavy density, but might not
completely eliminate the
problem.
4. If the error persists, adjust the
layout of the page to avoid or
minimize transitions from heavy
toner to white background.
484 Chapter 2 Solve problems ENWW
To Next Page
Loading...