Clean the pickup, feed, and separation rollers in the 1x500-sheet paper-feeder and
1x500-sheet paper-feeder with storage cabinet
NOTE: The 1x500-sheet paper-feeder with storage cabinet is shown below, hawever, the rollers are in the
same location in the 1x500-sheet paper-feeder.
Remove the tray and locate the rollers in the feeder.
●
Pickup roller (callout 1)
●
Feed roller (callout 2)
●
Separation roller (callout 3)
Remove any visible lint or dust from each of the rollers using compressed air or a clean lint-free cloth
moistened with warm water.
1
2
3
496 Chapter 2 Solve problems ENWW
To Next Page
Loading...