HP Color LaserJet Enterprise MFP M680 series - Product space requirements

Table 2-67 Service menu (M680 only)
First level Second level Value Description
Cycle Counts Document Feeder Kit Count Total number of pages since the
document feeder kit was
replaced.
Document Feeder Kit Interval Use this item to set the interval
that causes the product to
prompt the customer to replace
document feeder maintenance
kit.
Clean Rollers Count Total number of pages since the
document feeder rollers were
cleaned.
Clean Rollers Interval Use this item to set the interval
that causes the product to
prompt the customer to clean
the document feeder rollers and
separation pad.
ADF Count Set the total pages fed through
the document feeder.
Flatbed Count Set the total pages scanned from
the flatbed.
ADF Simplex Count Set the total single-sided pages
fed through the document
feeder.
ADF Duplex Count Set the total two-sided pages
fed through the document
feeder.
Copy Scan Count Set the total copy pages that
have been scanned.
Send Scan Count Set the number of scanned
pages sent to email.
Fax Scan Count Set the number of scanned
pages that have been faxed.
Copy Pages Count Set the number of scanned
pages that have been printed.
Scanner Settings ADF Settings Leading-edge
Trailing-edge
Left Side Front
Left Side Back
Set the calibration values.
WARNING! Do not change
these values unless instructed to
do so.
Glass Settings Leading edge glass
Left Side Glass
Set the calibration values.
WARNING! Do not change
these values unless instructed to
do so.
ENWW Service mode functions 505