Product space requirements
HP recommends that enough space is provided around the product to make sure there is sufficient space to
open doors and covers, provide proper ventilation, and for service personnel to remove covers and internal
assemblies.
Figure A-1 Product space requirements
430 mm (24 in) to
760 mm (30 in)
430 mm (24 in) to
760 mm (30 in)
430 mm (24 in) to
760 mm (30 in)
430 mm (24 in) to
760 mm (30 in)
Table A-6 Product space requirements
Item Recommended spacing
From the left-side or right-side of the
product, input accessory, or finishing
accessory to an obstruction
430 mm (17 in) to 760 mm (30 in)
From the front-side of the product, input
accessory, or finishing accessory to an
obstruction
610 mm (24 in) to 1010 mm (40 in)
From the back-side of the product, input
accessory, or finishing accessory to an
obstruction
460 mm (18 in) to 760 mm (30 in)
ENWW Product space requirements 529
To Next Page
Loading...