Fuser fan
Before proceeding, remove the following components:
●
Right-front cover and control-panel assembly. See
Right-front cover and control-panel assembly
on page 90.
Remove the fuser fan
1. Disconnect one connector (callout 1), release one tab (callout 2), and then slide the guide (callout 3)
down to remove it.
Figure 2-84 Remove the fuser fan (1 of 4)
3
2
1
2. Disconnect three connectors (callout 1), and then release the cables (callout 3) from the cable
guides (callout 2).
Figure 2-85 Remove the fuser fan (2 of 4)
2
3
3
1
142 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...