Optional paper feeder assembly (Tray 3)
Tray 3 rear cover
Remove two screws (callout 1), and then remove the rear cover (callout 2).
Figure 2-104 Remove the Tray 3 rear cover
2
1
Tray 3 left cover
1. Take the tray out of the feeder, release one tab (callout 1), and then remove the lever (callout 2).
Figure 2-105 Remove the Tray 3 left cover (1 of 2)
1
2
ENWW Removal and replacement procedures 161
To Next Page
Loading...