2. Remove one screw (callout 1), and then remove the right-front cover (callout 2).
Figure 2-107 Remove the Tray 3 right-front cover
2
1
Tray 3 front-upper cover
1. Remove the tray from the feeder, and then remove the right-front cover (see Tray 3 right-front cover
on page 163).
2. Remove two screws (callout 1), release two tabs (callout 2), and then remove the front upper cover
unit (callout 3).
Figure 2-108 Remove the Tray 3 front-upper cover
1
2
3
Tray 3 right door
1. Lift the product off the feeder, and then open the tray right door.
164 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...