Paper Setup
Use these options to configure your default settings. These are the same options that are available on
the control-panel menus on the control panel. For more information, see
Control-panel menus
on page 211.
The following options are available for handling print jobs when the product is out of media:
●
Select Wait for paper to be loaded.
●
Select Wait forever from the Paper out action drop-down list to wait indefinitely.
●
Select Cancel from the Paper out action drop-down list to cancel the print job.
●
Select Override from the Paper out action drop-down list to send the print job to another paper
tray.
The Paper out time field specifies how long the product waits before acting on your selections. You
can specify from 0 to 3600 seconds.
NOTE: You must click Apply before your changes take effect.
ENWW Tools for troubleshooting 205
To Next Page
Loading...