Motors
The product has eight motors for paper feed and image formation. The DC controller determines a motor
failure if a motor does not reach a specified speed within a specified period after motor startup or if the
rotational speed is outside a specified range for a specified period.`
Figure 1-4 Motors
Pickup motor (M5)
Cassette lifter motor (M9)
Scanner motor (M10)
Fuser motor (M4)
Developing disengagement motor (M6)
ITB motor (M1)
Drum motor (M2)
Developing motor (M3)
ENWW Engine-control system 11
To Next Page
Loading...