Removal and replacement procedures
Customer self repair (CSR) components
Print cartridges
When a print cartridge approaches the end of its estimated useful life, the control panel displays a
message recommending that you order a replacement. The product can continue to print using the
current print cartridge until the control panel displays a message instructing you to replace the cartridge,
unless you have selected the option to override the message by using the Replace supplies menu.
NOTE: Cartridge life remaining is used to determine if a supply is near or at estimated end of life.
Cartridge life remaining is approximate only and varies depending on types of documents printed and
other factors.
The product uses four colors and has a different print cartridge for each color: black (K), magenta (M),
cyan (C), and yellow (Y).
You can replace a print cartridge when the print quality is no longer acceptable. The control-panel
message also indicates the color of the cartridge that has reached the end of its estimated useful life
(for cartridges that are not used). Replacement instructions are provided on the label on the print
cartridge.
CAUTION: If toner gets on clothing, wipe it off with a dry cloth and wash the clothes in cold water. Hot
water sets toner into fabric.
NOTE: Information about recycling used print cartridges is on the print-cartridge box.
Replace print cartridges
1. Open the front door. Make sure that the door is completely open.
2. Grasp the handle of the used print cartridge and pull out to remove.
ENWW Removal and replacement procedures 69
To Next Page
Loading...