Toner-collection unit
NOTE: The toner-collection unit is designed for a single use. Do not try to empty the toner-collection
unit and reuse it. Doing so could cause damage to the product. For recycling information, see the product
user guide.
1. Open the toner collection unit access door (callout 1) on the product back side.
2. Grasp the top of the toner-collection unit (callout 2), and then remove it from the product.
Figure 2-2 Remove the toner-collection unit
2
1
72 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...