Pickup roller (Tray 1)
CAUTION: Do not touch the spongy roller surface unless you are replacing the roller. Skin oils on the
roller can cause paper pickup problems.
1. Open Tray 1 (callout 1), and then remove the pickup roller cover (callout 2).
Figure 2-4 Remove the pickup roller (Tray 1) (1 of 2)
1 2
2. Spead out the pickup roller retainers (callout 1) until both sides unlatch, and then remove the pickup
roller (callout 2).
Figure 2-5 Remove the pickup roller (Tray 1) (2 of 2)
2
1 1
80 Chapter 2 Removal and replacement ENWW
To Next Page
Loading...