Description Spare part number
AMD A6-6310 processor and UMA graphics memory with a touch screen:
●
Without Windows 8 793101-001
●
Windows 8 Standard 793101-501
●
Windows 8 Professional 793101-601
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 49).
5. Remove the following components:
●
Service cover (see
Service cover on page 55)
●
Keyboard (see
Keyboard on page 57)
●
Top cover (see
Top cover on page 60)
●
USB board (see
USB board on page 67)
●
Hard drive (see
Hard drive on page 68)
NOTE: When replacing the system board, be sure that the following components are removed from the
defective system board and installed on the replacement system board:
●
Memory module (see
Memory module on page 56)
●
Heat sink assembly (see
Heat sink assembly on page 91)
●
WLAN module (see
WLAN module on page 71)
To remove the system board:
1. Position the computer upright, and then disconnect the following cables from the system board:
(1): Power connector cable
(2): Display cable
(3): Speaker cable
Component replacement procedures 87
To Next Page
Loading...
Need help?
General