Fan/Baffle Assembly
1. Prepare the computer for disassembly (Preparation for Disassembly on page 74).
2. Remove the access panel (
Access Panel on page 75).
3. Unplug the fan cable from the system board (CHFAN1, P9).
4. Press the lever that secures the assembly to the chassis (1), pivot the assembly forward toward
the front of the computer (2), and then lift the assembly straight up and out of the computer (3).
To reinstall the fan/baffle, reverse the removal procedure.
104 Chapter 8 Removal and Replacement Procedures Microtower (MT) Chassis
To Next Page
Loading...
