Integrated ATI RADEON
X300 Graphics
3D/2D Controller
Full Microsoft DirectX® 9 based with Shader 2.0 support, full precision floating
point pixel pipeline, 2x, 4x, or 6x Anti-Aliasing, hidden surface removal using
16, 24, or 32-bit Z-Buffering, and support for 12-bit per pixel formats. Support
for Microsoft's DirectDraw, Double Buffering, Virtual Sprites, Transparent Blit,
and Masked Blit.
VGA/DVI Controller
Integrated
Bus Type
PCI Express™ x16 for optional graphics upgrade.
RAMDAC
Integrated
Memory
UMA mode operation uses from 32MB up to 256MB of shared system memory.
Controller Clock Speed
400 MHz
Overlay Planes
Back end overlay supporting Motion Adaptive De-Interlacing
Maximum Color Depth
32 bits/pixel
Maximum Vertical
Refresh Rate
Supports resolutions up to 2045x1536 @ 32bpp.
Multi-display Support
SURROUNDVIEW™ support for up to four monitors with an ATI discrete
graphics card. Up to 2 displays can be supported via the motherboard's VGA
and DVI-D connectors. An additional 2 displays can be supported via the ATI
discrete graphics card. Dual independent display modes are supported.
Graphics/Video API
Support
Microsoft DirectX 9, DirectXVA®, VMR7, VMR9, GDI/GDI+; OpenGL® 1.4.
Integrated DVI-D
support
DVI-D Connector
Compliant with DDWG (Digital Display Working Group) and VESA
specifications for a single-link digital DVI (DVI-D) connector.
Dual Head Support
Yes, when used with the integrated VGA connector
Display Devices Supported
HP L1530
HP L1740
HP L1755
HP L1940
HP L1955
HP L2035
HP L2335
Color Depth
All modes support 8-bpp, 16-bpp, and 24-bpp color depths
Host Interface Connector
Mechanically compliant with PCI-E standard
Dot Clock
165 MHz maximum
Display Modes
Supports display modes that require up to 165-MHz bandwidth on the link,
as shown in the following table.
QuickSpecs
HP Compaq dc5750 Business PC
Technical Specifications - Graphics
DA - 12546 North America — Version 39 — October 29, 2008
Page 26
To Next Page
Loading...
