HP Compaq dc7100 CMT User Manual

A-12 361834-001 Technical Reference Guide
Error Messages and Codes
NOTES:
[1] Local loopback mode [4] Modem auto originate test
[2] Analog loopback originate mode [5] Modem auto answer test
[3] Analog loopback answer mode [6] Modem direct connect test
A.12 System Status Error Messages (16xx-xx)
1202-13 Data block retry limit reached [2] 1210-01 Time-out waiting for SYNC [6]
1202-21 Time-out waiting for SYNC [3] 1210-02 Time-out waiting for response [6]
1202-22 Time-out waiting for response [3] 1210-03 Data block retry limit reached [6]
1202-23 Data block retry limit reached [3] 1210-04 RX exceeded carrier lost limit
1203-XX Modem external termination test 1210-05 TX exceeded carrier lost limit
1203-01 Modem external TIP/RING
failure
1210-06 Time-out waiting for dial tone
1203-02 Modem external data TIP/RING
fail
1210-07 Dial number string too long
1203-03 Modem line termination failure 1210-08 Modem time-out waiting for remote
response
1204-XX Modem auto originate test 1210-09 Modem exceeded maximum redial limit
1204-01 Time-out waiting for SYNC [4] 1210-10 Line quality prevented remote response
1204-02 Time-out waiting for response [4] 1210-11 Modem time-out waiting for remote
connection
Table A-10. (Continued)
Modem Communications Error Messages
Message Probable Cause Message Probable Cause
Table A-11
System Status Error Messages
Message Probable Cause
1601-xx Temperature violation
1611-xx Fan failure

HP Compaq dc7100 CMT Specifications

General

Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Processor	Intel Pentium 4
Chipset	Intel 915G Express
Storage	40GB to 160GB SATA HDD
Graphics	Integrated Intel Graphics Media Accelerator 900
Optical Drive	DVD-ROM, CD-RW, DVD+/-RW
Network	Integrated Gigabit Ethernet
Form Factor	Convertible Minitower
Expansion Slots	1 PCI Express x16, 3 PCI
Ports	USB 2.0, serial, parallel, PS/2, audio in/out