Hardware Reference Guide www.hp.com 1–3
Product Features
Rear Panel Components
1 Power Cord Connector 7
n
RJ-45 Network Connector
2 Voltage Select Switch 8
l
Parallel Connector
3
b
PS/2 Mouse Connector (green) 9
c
Monitor Connector
4
a
PS/2 Keyboard Connector
(purple)
-
Y
Line-Out Connector (green)
(for powered devices)
5
o
Universal Serial Bus (USB) q
j
Line-In Audio Connector (blue)
6
m
Serial Connector w
c
Digital Video Interface (DVI–D)
Monitor Connector (optional)
✎
Arrangement and number of connectors may vary by model.
If a PCI graphics card is installed, the connectors on the card and the system board may be used at
the same time. Some settings may need to be changed in F10 setup to use both connectors. For
more information about Boot Order, refer to the Computer Setup (F10) Utility Guide on the
Documentation and Diagnostics CD.
The optional DVI–D connector will only work with DVI displays. It cannot be adapted to support
displays with analog inputs.
To Next Page
Loading...
