8 Computer Setup Utility Guide
Computer Setup (F10) Utility
Peripheral Setup
(Continued)
USB 1.1 Device Legacy
Support
Sets the USB 1.1 Device Legacy Support
under DOS Mode.
• Disable: USB 1.1 Device Legacy
Support disabled
• No Mice: A mouse is not supported
• All Device: All devices are supported
OnBoard Serial Port Sets the OnBoard Serial PortA settings
•Auto (Default)
•Disable
•3F8/COM1
•2F8/COM2
•3E8/COM3
•2E8/COM4
OnBoard Parallel Port Sets the OnBoard Parallel Port settings
•Auto (Default)
•Disable
•378
•278
Parallel Port Mode Allows you to set the Parallel Port mode.
•SPP (Bi-Dir)
• SPP and EPP-1.9
•ECP
• ECP and EPP-1.9 (Default)
Computer Setup (Continued)
Heading Option Description
✎
Support for Computer Setup options may vary depending on your specific hardware
configuration.
To Next Page
Loading...
Need help?
General