Service Reference Guide, dx2000 ST 371411-001 C–7
POST Error Messages
Invalid Electronic Serial
Number.
Electronic serial number
has become corrupted.
Run Computer Setup. If Setup already
has data in the field or will not allow the
serial number to be entered, download
from http://www.hp.com and run
SP5572.EXE (SNZERO.EXE).
Run Computer Setup and try to enter
serial number under Security, System ID,
then save changes.
ECC Multiple Bit Error
Detected in Memory
Module.
Chipset has detected
more than one bad bit in
a 64-bit quadword of the
memory array.
Replace the memory module.
Parity Check 2. Parity RAM failure. Run Computer Setup and Diagnostic
utilities.
POST Error Messages
Screen Message Probable Cause Recommended Action
To Next Page
Loading...
