6–18 371411-001 Service Reference Guide, dx2000 ST
Removal and Replacement Procedures— Slim Tower (ST) Chassis
6.8.5 Primary Hard Drive
1. Prepare the computer for disassembly (Section 6.1, “Preparation for Disassembly”).
2. Remove the computer access panel (Section 6.3, “Computer Access Panel”).
3. Remove the front bezel (Section 6.4, “Front Bezel”).
4. Raise the Easy Access drive bay to the upright position.
5. Disconnect the power cable and signal cable from the back of the drive.
To Next Page
Loading...
