Quick Setup
Quick Setup & Getting Started www.hp.com 1-5
Step 5: Connect the Power Cords
Connect the power cords and monitor cord as shown. Turn on the
monitor, then turn on the computer.
Å
WARNING: To reduce the risk of electric shock or damage to the
equipment:
■ Do not disable the power cord grounding plug. The grounding
plug is an important safety feature.
■ Plug the power cord into a grounded (earthed) electrical outlet
that is easily accessible at all times.
■ Disconnect power from the computer by unplugging the power
cord from either the electrical outlet or the computer.
Ä
CAUTION: Be sure there is a 10.2 cm (4-inch) clearance on all vented
sides of the computer and monitor to permit the required airflow.
To Next Page
Loading...
