HP Compaq dx6120 Series User Manual

DC Power Requirement 5 VDC ± 5%-100 mV ripple p-p
12 VDC ± 5%-200 mV ripple p-p
DC Current 5 VDC (< 1000 mA typical, < 1600 mA maximum)
12 VDC (< 600 mA typical, < 1400 mA maximum)
Total Drive Power
(standby mode)
< 2.5 Watt
Audio Output Level 0.7 Vrms (typical)
Configuration Jumper
Block
Master, slave, and cable select modes
Data Interface Connector 40-pin, shrouded and keyed, flat ribbon
Environmental
(all conditions non-
condensing)
Temperature (operating) 41° to 122° F (5° to 50° C)
Relative humidity
(operating)
10% to 90%
Maximum wet bulb
temperature (operating)
86° F (30° C)
Certifications,
Requirements
MPC-3 compliant, multi-read requirements, ACA AS/NZS 3548, ANSI C63.4-
1992, ATAPI Spec SFF-8020, ATA Spec X3T9.2, CB Bulletin No. 92A, CSA C22.2
No. 950-1995, C.I.S.P.R. Pub 22, EMKO-TSE 207/94, TUV or VDE EN60 950,
EN60825-1, Microsoft PC2001 certification, Microsoft Logo for Windows XP,
2000, and NT4
16X DVD+/-RW Drive 5.25-inch, half-height, tray-load
Orientation Either horizontal or vertical
Interface type ATAPI/EIDE
Disc recording capacity 8.5 GB DL or 4.7 GB standard
Dimensions (W x H x D) 5.9 x 1.7 x 8.0 in (15.0 x 4.4 x 20.3 cm)
Weight (max) 2.6 lb (1.2 kg)
Write speed DVD+R Up to 16X
DVD+RW Up to 4X
DVD+R DL Up to 2.4X
DVD-R Up to 8X
DVD-RW Up to 4X
CD-R Up to 40X
CD-RW Up to 24X
Reads DVD+R/-R/+RW/-RW Up to 16X
DVD-ROM Up to 16X
CD-R/RW Up to 40X
Access time
(typical reads, including
settling)
Random DVD: < 130 ms (typical), CD: < 120 ms (typical)
Full Stroke DVD: < 240 ms (seek), CD: < 200 ms (seek)
Startup Time Single-session: < 7 seconds (typical), Multi-
session: < 30 seconds (typical)
Stop Time < 4 seconds
QuickSpecs
HP Compaq Business Desktop dx6120 Series
Technical Specifications - Optical Storage
DA - 12243 Worldwide — Version 21 — May 25, 2007 Page 48

HP Compaq dx6120 Series Specifications

General

Brand	HP
Model	Compaq dx6120 Series
Category	Desktop
Language	English