To Next Page

To Previous Page

Adjusting the Monitor Settings

The monitor settings can be adjusted from the On-Screen Display (OSD) menu or from the HP

Display Assistant utility.

NOTE: If there is a problem with the display settings, try resetting the settings to the factory defaults

by opening the OSD and selecting Factory Reset from the OSD menu.

Using the On-Screen Display Menu

Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To

access the OSD, do the following:

1. If the monitor is not already on, press the Power button to turn on the monitor.

2. To access the OSD Menu, press the Menu button on the monitor’s front panel.

3. To navigate through the OSD Menu, press the + (Plus) button on the monitor’s front panel to

scroll up, or the – (Minus) button to scroll in reverse.

4. To select an item from the OSD Menu, use the + or – buttons to scroll to and highlight your

selection, then press the OK button to select that function.

5. Adjust the item using the + or – buttons on the front panel to adjust the scale.

6. After adjusting the function, select Save and Return, or Cancel if you don’t want to save the

setting, then select Exit from the Main Menu.

NOTE: If the buttons remain untouched for 10 seconds while displaying a menu, the OSD

automatically saves all changes and exits.

20 Chapter 4 Operating the Monitor ENWW

Other manuals for HP Compaq LA2006x

Questions and Answers:

Need help?

Do you have a question about the HP Compaq LA2006x and is the answer not in the manual?

General