Optical drives
Drives 4–3
Removing an optical disc (with power)
If the computer is running on external or battery power:
1. Turn on the computer.
2. Press the release button 1 on the drive bezel to release the
media tray, and then pull out the tray 2.
3. Remove the disc 3 from the tray by gently pressing down on
the spindle while lifting the outer edges of the disc. Hold the
disk by the edges and avoid touching the flat surfaces.
✎
If the media tray is not fully accessible, tilt the disc carefully
as you remove it.
4. Close the media tray and place the disc in a protective case.
To Next Page
Loading...
