10. Remove the power connector (4).
Reverse this procedure to install the power connector cable.
Display assembly
Description Spare part number
14.0-in, HD, LED, BrightView display assembly (includes microphone and wireless antenna transceivers and cables)
For use only with computer models equipped with an AMD processor:
Equipped with webcam 663603-001
Not equipped with webcam 645986-001
For use only with computer models equipped with an Intel processor, equipped with webcam 645984-001
Before removing the display assembly, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4. Remove the battery (see
Battery on page 41).
66 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
