Hardware Reference Guide www.hp.com F-1
F
Shipping information
Shipping preparation
Follow these suggestions when preparing to ship the thin client:
1. Turn off the thin client and external devices.
2. Disconnect the power cord from the electrical outlet, then from
the thin client.
3. Disconnect the system components and external devices from
their power sources, then from the thin client.
4. If you have upgraded the SODIMM, remove it and replace the
original SODIMM that came with the unit.
5. Pack the system components and external devices in their original
packing boxes or similar packaging with sufficient packing
material to protect them.
✎
For environmental nonoperating ranges, see Appendix A,
“Specifications” in this guide.
To Next Page
Loading...
